1·The tool presses the sheets together and only then injects epoxy resin into them under pressure.
模具将板材冲压在一起，此时加压注入环氧树脂。
2·Indeed, that is precisely what Dr Elmqvist used to create moulds for his epoxy-resin generators.
事实上Dr Elmq vist最早就是用鞋油盒来为环氧基树脂制成的发电器做模子。
3·The formulation design, processing characteristic and material choice of winding without filling in epoxy resin cast dry-type transformer are introduced. The warnings in cast process are presented.
介绍了环氧树脂浇注干式变压器无填料绕组浇注的工艺特点、材料的选择和配方设计，提出了浇注过程中应注意的事项。
4·Spraying must be washed clean appearance, there is oily wax with a agent oil, new welding or metal appearance except rust after use of epoxy resin antirust primer to prevent rust.
施喷外表必定要用水洗洁净，有油质，蜡质要用出有剂出油，新焊接或除铁锈后的金属外表要用——环氧树脂防锈底漆处理以防生锈。
5·Delivery of epoxy resin coated steel pipe is suitable for water, water, water, oil, gas and other medium, PVC plastic pipe for drainage, water, oil, gas and other media delivery.
环氧树脂涂塑钢管适用于给排水、海水、温水、油、气体等介质的输送，聚氯乙烯涂塑钢管适用于排水、海水、油、气体等介质的输送。
6·Cylinder surface is epoxy resin.
气瓶表层为环氧树脂。
7·The preparation and properties of superfine glass powder/epoxy resin composites were studied.
研究了玻璃粉／环氧树脂封接复合材料的制备与性能。
8·Applications: Suitable for wood, paper, leather, fabric, acrylic, epoxy, acrylic, unsaturated polyester resin and other non-metal materials, etc.
应用：适合木制品、纸张、皮革布料、有机玻璃、环氧树脂、亚克力、不饱和聚酯树脂等非金属材料。
9·As a result, the contact Angle of CFs with respect to epoxy resin was found to be remarkably decreased.
结果表明，经过氧化和氨化方法处理后碳纤维与环氧树脂的接触角降低。
10·Application: can mark on metal, alloy and vapor, ABS, epoxy resin, printing ink etc.
应用：可标记金属、合金及气化物、ABS、环氧树脂、油墨等。